Quick answer
To attach a SMISKI ZipperBite Vol. 1, simply slide the pull tab through the figure's slit until it clicks, then test the zipper on your bag or jacket to ensure it moves freely.
Why ZipperBites are different from other SMISKI figures
Unlike standard SMISKI figures that sit on shelves, ZipperBites are designed specifically to attach to zipper pull tabs. This means they have a built-in slit that grips the tab, not a flat base. The glow-in-the-dark feature also makes them easy to spot in low light, ideal for keys or backpack zippers.
Because they are small and lightweight, they won't weigh down most zippers, but very flimsy pulls on thin drawstrings may not hold them securely. Stick to standard zipper tabs on bags, backpacks, jackets, and pencil cases.
How to attach SMISKI ZipperBite Vol. 1
- Check your zipper pull tab: Look for a small hole in the zipper pull tab. ZipperBites require an open hole wide enough for the figure's slit to slide over. If the tab has no hole or is solid metal, the ZipperBite won't attach. Try a different bag or jacket.
- Align the ZipperBite slit with the tab: Hold the ZipperBite so the slit at the back aligns with the zipper pull tab. Gently push the tab into the slit until you hear or feel a soft click. Do not force it. If it resists, the tab may be too thick. Excess force can break the figure.
- Secure the attachment: After the tab is seated in the slit, squeeze the sides of the ZipperBite slightly to ensure it grips the tab. The figure should not slide off when you shake the bag gently. Test by zipping the bag. The ZipperBite should move with the tab without slipping off.
- Test zipper movement: Zip the bag or jacket up and down a few times. The ZipperBite should follow the tab smoothly without catching on fabric or zipper teeth. If the figure snags, reposition it so the slit faces the direction of pull, or choose a different zipper on the same item.
- Charge for glow effect: Expose the attached ZipperBite to direct light for a few minutes. The glow-in-the-dark material will activate and last for a short time in darkness. Recharge as needed. The glow fades faster in humid conditions or if the figure is in a pocket without light exposure.
What you need
- SMISKI ZIPPERBITE - Vol. 1: SMISKI ZipperBites attach to zippers and glow in the dark. They are designed for zipper pull tabs with a hole. The slit fits most standard zipper tabs, but check that your zipper pull has an open hole, not a solid loop.

SMISKI ZIPPERBITE - Vol. 1

